Sintered Bronze Filters
Introduction:
Sintering gives the high porosity material its shape-stability and properties of a strong metal component. Sintered bronze product has a unique structure shows that the grain boundaries run over the original particle boundaries. The pores after the sintering process are mechanically fixed with respect to both size and position. Porosity, size and shape are the determining factor in producing sintered bronze product. The most common use is sintered filter elements in hydraulic and pneumatic industry.
Process:
Individual spherically shaped bronze powder packed into moulds then sintering together, forming a product of bronze having a defined porosity with excellent strength.
Advantages:
-
Controlled porosity
-
3-dimensional filtration
-
Good corrosion resistance
-
High dirt holding capacity
-
Superior mechanical strength
-
Comparatively low cost
Filtration and Specification:
Standard Parts
Pneumatic Exhaust Muffler/Air Silencers utilize porous sintered bronze directly bonded to nickel plated steel pipe threads to diffuse air and muffle noise from exhaust ports on valves, cylinders and air tools. They reduce noise by 15-20 decibels.
-
Used for: Oil, Gasoline or Air;
-
Operation Pressure:2MPa/ 300psi Max.;
-
Operation Temp:0°C-150°C/ 35°F-300°F;
-
Filtration:40 microns(standard);
-
Connect Thread: NPT 1/8"--NPT 1 1/2";
Breather Vents have many applications: vacuum relief or pressure equalization on gear boxes, oil tanks or reservoirs. Common use can be found on cylinders or valves to prevent dirt and foreign particles from entering ports open to the system. Nickel plated steel thread body sintered together with bronze powder.
-
Used for: Air or Gas;
-
Operation Pressure: 1MPa/ 150psi Max.;
-
Operation Temperature: 0°C-150°C/ 35°F-300°F;
-
Filtration: 40 microns
-
Connect Thread: NPT 1/8"--NPT 1 1/2";
Push-to-Connect Mufflers have straight, unthreaded fitting connected to a plastic pipe. Easy install. The unit diffuse air and muffle noise from the exhausted ports, reduce exhaust noise to acceptable levels with OHSA noise requirements. Nickel plated steel fitting assembly with sintered bronze filter element.
-
Used for: Air or Gas;
-
Operation Pressure: 1.3MPa/180psi Max.;
-
Operation Temperature: 0°C-150°C/ 35°F-300°F;
-
Filtration: 25 microns(standard)
Sintering Facility
A Leading Supplier of Sintered Bronze Filter and Pneumatic Exhaust Muffler Since 2006
Sintermatic Industrial Inc.
Email: sales@sintermatic.com
Tel: +86 189 3031 2765